Commercial Industrial Automatic Egg Incubator Duck Incubator Hatching Machine

Commercial Industrial Automatic Egg Incubator Duck Incubator Hatching Machine

Specification of Automatic Egg Incubator Duck Incubator
**Size: 137*74*152cm

**Weight: 85kg

**Power: 500watts

**Voltage: 220Volt/50hz, 60hz

Company Information
1.The incubator usd AC 220V / 50HZ voltage work.In order to ensure the safety of use, require qualified electricians to install. Must be added leakage protection switch and voltage regulator in the front of the power supply. And must be connected to ground effectively

2.Power on 5 minutes --- Open the door breathable 2 minutes --- Close the door 10 minutes --- Open the door breathable 2 minutes --- close the door warming

3.Add warm water to the basin to prevent the humidification tube dry, burning basin, the water level need higher than the surface of the humidifying tube 2 ~ 3 cm without overflow basin. Use a correct thermometer and the machine's temperature sensor tied together, put into the machine.

4.Before putting eggs into incubator, hold down the "UP" button and not let it go, Untile the egg trays is level or forward oblique, easy to enter.

5.Clean and disinfect the inside of the machine with 0.2% potassium permanganate solution. Egg trays soaked in disinfectant to disinfection. Egg need disinfection as to conditions.After disinfection, put the big side of the eggs on the egg tray, preheated at room temperature for 2 to 4 hours, let the embryo adapt to temperature changes. The best time to put eggs into machine is part.

Commercial Industrial Automatic Egg Incubator Duck Incubator Hatching Machine